Now as the world is facing an extraordinary Corona time where everyone is fighting from their home which also means that everyone is studying, playing, and browsing the internet. With wireless mobile connectivity, this is the best time to understand the importance of broadband and for the best connection, there is Setek WiFi Extender for you. We provide setek wifi range extender setup for you. Just have a look at the details below.
Why do you need a Setek Extender Setup?
- It provides you coverage upto 2500 square feet which means no dead spots and connection upto 15 devices streaming, gaming, conferencing and it is universally compatible.
- It gives you fast, strong and stable signals, high performance 300 Mbps, and 2.4 GHz processor can easily cover all your devices.
- No need to worry about overvoltage protection as you can feel secure with overvoltage protection WEP/WPA/WPA2 security protection which is the best protection for your phone, home devices, or office devices.
- You just need one click and you are done just press the WPS button to connect it to your router. Connect your LAN and ethernet cables by plugging them directly into extender ports and use it as a media bridge
It comes up with 5 MODES-
- Wireless router mode
- Repeater mode
- Client mode
- Access point mode
- WSP client router mode
- It also has side button which helps you in reset with the help of it you can easily reset your connection if needed.
Nowadays, as Wi-Fi extenders are affordable but they are still difficult and tricky to setup. To help you out with the setup there are two methods from which you can easily setup-
- Installation Setek Repeater using your phone-
- Plug the Setek wifi repeater into a socket and position it near the main router.
- Connect via WiFi to the SETEK_EXTENDER_XXX or WIRELSS_N network
- Open the web browser of your phone and type 192.168.10.1 in the address bar, then press enter.
- Use ‘admin’ as your default login password
- Now the device will automatically search for the nearby wifi networks.
- *Choose WIZARD and then a WIRELESS REPEATER MODE
- Select your wifi network, and type its password.
- By default, an extender network will be created with the suffix “_EXT”
- Wait approximately 30 seconds for the network to appear.
- If you are having problems with the signal strength try moving the repeater close to the router for best signals.
2) Setup Setek Wifi extender setup via WPS
- For your fast connection plug extender in the same room with your router.
- Wait for the green light to appear on the extender.
- Press and hold the WPS on the extender for a few seconds now do the same with your router.
- After few seconds you can see flickering lights on your extender and the router.
- After a successful connection, the green light on the extender will turn solid.
- Now unplug the extender and place it according to your need.
SOME FREQUENTLY ASKED QUESTIONS(FAQ’S)-
Q) How much it’ll boost my wifi signals?
A) So, it basically depends on your wifi’s output signals but yes it boosts signals to the maximum.
Q) Does this extender have to be hardwired to the router to work?
A) No, it works without any wired connection.It gets its signals from the router and extends the signal to areas that received a weak signal or no signal at all.
Q) Do I plug this in next to the router or next to where I need the signal stronger?
A) You would plug this in within range of the router, but closer to where you need the signal.
Q) How do you setup its security key?
A) The security key will remain the same as your current router.
Q) Q: Can I connect the hard wired printer?
A) No, This device extends your Wi-Fi signals. Any local hardwired connectivity is not possible.
Stay Home, Stay Safe, Covid19