The Guest network is an additional feature of the Linksys Smart wifi Routers and Linksys wifi Routers. The computers or other devices which are connected to the Guest Network will have the internet connection but they can’t access the router’s main network and communicate with other devices within the network. Also, the SSID of the Guest network carries the same name but will have –guest suffix. But, sometimes you may face the Linksys smart wifi guest access not working issue. In that case, you can try a few troubleshooting tips to resolve the error. Let’s discuss them in detail below.
Resolving the Linksys smart wifi guest access not working issues using the Linksys Connect
Ensure that you are working with an active internet connection. All the devices connected to the network should have stable internet access. Check out the factors below that explain why you are having issues connecting to the Guest Network:
The device is connected to the main WiFi instead of the Guest wifi
Always remember that once you are done with the router setup, there will be two wifi names. One will be the name of the main network and the other will be the Guest Network name. With _guest suffix. You will be required to fill in the Guest Password once you open the web browser.
You used the wrong password for the Guest password
It is possible that instead of the Guest Password you used the wifi password or the Admin password. Always remember that the Guest password is unique. You can use the Guest password for the wifi devices connected to the Guest Network. Enter it when the prompt appears.
The Guest Sign-in screen fails to display
Make sure that you access the internet using a completely different browser. You can also try to clear the web browser’s cache. The piled-up cache and history can block access to the Sign-in screen and you will encounter the Linksys guest login page not working error. The connection with the router must be active by connecting the computer directly to the modem. Also, keep in mind that the Guest password cannot be disabled in any case until the Guest Access feature is on.
Not able to see the guest network of Linksys router after setup
You can use the Linksys Connect software or Linksys Smart wifi setup wizard to make sure that the Linksys Smart wifi or Linksys wifi routers are set up properly. There might be issues when you are setting up the device for the first time via the manual method. This feature might not be functional at that time.
Outdated firmware of Linksys Smart wifi router
You must keep the firmware updated for the Linksys Smart wifi router to fix the Linksys guest network not working issue and enhance its performance. The firmware should be updated because it helps in mending several issues while you work on your Linksys router. The updated firmware might contain some enchantments that were not available previously. The firmware update can be performed automatically as well as manually.
Linksys Smart Wifi Router Reset
You can reset Linksys Router anytime you feel that the Linksys router guest access not working to your expectations even after following the steps given above. This option will erase all your settings previously saved and you will be left to start from scratch. There are basically two ways to reset your Linksys Smart wifi router. We will discuss them in detail below:
Using the Hardware Reset button
Just press the reset button present on the back panel of the router. The location may vary with every model. Now, keep holding the button for around 10 seconds and then gently release it. The router will reboot and with this, the reset process finishes.
Reset using the web-based facility
You can reset the router after logging into the Linksys Smart wifi account. For this Click Troubleshooting under the Router Settings and then choose Diagnostics. Finally, click on the Reset button present under the Factory Reset. With this command, the router has been reset and you can configure it again using the default credentials available.
Conclusion
Still, facing the issue of Linksys smart wifi guest access not working? You can chat with our experts present at the end. They will guide you with every step and you can proceed smoothly.
Website: https://geturbest.com/